Drukuj
Features :
2263H 12″ Differential Drive® dual voice coil dual gap,
neodymium magnet transducer
1000 watts continuous pink noise,
4000 watts peak power handling capacity
Large vent area for high output with low distortion
For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

Specifications :
Frequency Range
(-10 dB) : 35 Hz  1 kHz
Frequency Response
(ą 3 dB) : 43 Hz  1 kHz
Transducer Power Rating : 1000 W (4000 W peak), 2 hrs.
Long-Term System Power Rating : 700 W (2800 W peak), 100 hrs.
Maximum SPL (1m) : 40 Hz – 300 Hz: 126 dB-SPL
cont avg (132 dB peak)
System Sensitivity : 40 Hz – 300 Hz: 96 dB-SPL,
1W (2.83V) @ 1m
Nominal Impedance : 8 ohms
Low Frequency Driver : 1 x 2263H, 305 mm (12 in) dia.,
75 mm (3 in) Dual Coil Dual
Gap neodymium Differential Drive® driver
Enclosure : Rectangular cabinet, 16 mm (5/8 in)
exterior grade 11-ply birch plywood
Suspension Attachment : 16 points (4 top, 4 bottom, 4 each side),
M10 threaded hardware
Finish : Black DuraFlex” finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel,
with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) : 406 x 369 x 483 mm
(16.0 x 14.5 x 19.0 in)
Net Weight : 16.3 kg (36.0 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers.

Strona Producenta

http://www.jblpro.com