Drukuj
Features :
2 x 2269H 18″ Differential Drive® dual voice coil dual gap, neodymium magnet transducers
4000 watts continuous pink noise,
16000 watts peak power handling capacity
Ultra Long Excursion
Large vent area for high output with low distortion
Parallel/Discrete switchable input mode
For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

Specifications :
Frequency Range
(-10 dB) : 20 Hz – 1 kHz
Frequency Response
(ą 3 dB) : 25 Hz – 1 kHz
Transducer Power Rating : 4000 W (16000 W peak), 2 hrs.
Input Modes : Drivers Parallel / Drivers Discrete
Long-Term System Power Rating : 2400 W (9600 W peak), 100 hrs.
Maximum SPL (1m) : 25 Hz – 200 Hz: 135 dB-SPL
cont avg. (141 dB peak)
System Sensitivity : 25 Hz – 200 Hz: 99 dB-SPL,
1W (2.0V) @ 1m
Nominal Impedance : 4 ohms in parallel-drive mode
2 x 8 ohms in discrete-drive mode
Low Frequency Driver : 2 x 2269H, 460 mm (18 in) dia.,
100 mm (4 in) Dual Coil Dual
Gap neodymium Differential Drive®, VGC” drivers
Enclosure : Rectangular cabinet, 16 mm (5/8 in)
exterior grade 11-ply birch plywood
Suspension Attachment : 16 points (4 top, 4 bottom, 4 each side)
M10 threaded hardware
Finish : Black DuraFlex” finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) : 1092 x 560 x 815 mm
(43.0 x 22.0 x 32.1 in)
Net Weight : 71.9 kg (158.5 lb)
Optional Accessories : M10 x 35 mm forged shoulder
eyebolts with washers.

Strona Producenta

http://www.jblpro.com