Highly weather-resistant IP56 rating
Consistent 120° x 120° broadband pattern control
” 200 mm (8 in) woofer with Kevlar-reinforced cone
and 50 mm (2 in) voice coil.
” 25 mm (1 in) exit compression driver with unique patented design
and high temperature polymer diaphragm.
Extraordinary clarity for speech, with extended frequency
response for music.
Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
High-power passive crossover network.
80 Hz 20 kHz frequency response.
200 Watt 70V/100V multi-tap (built-in transformer)
or direct 8© low-impedance.
Frequency Range (-10 dB) : 80 Hz 20 kHz
Frequency Response (ą3 dB) : 100 Hz 20 kHz
Coverage Pattern : 120° x 120°
Directivity Factor (Q) : 8.1 (1 k 16 kHz)
Directivity Index (DI) : 8.4 dB (1 k 16 kHz)
Long-Term System Power Rating (IEC) : 250 W 2 hrs.
200 W 100 hrs
Sensitivity (2.83V @ 1m) : 94 dB (Ave. 100 Hz 20 kHz)
Maximum SPL : Direct 8©: 118 dB (peaks of 124 dB)
200 W Tap: 117 dB
Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance : 8 ohms
Transformer Taps : 70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Low Frequency Driver : Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
High Frequency Driver : 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver Protection : Minimum audibility SonicGuard” HF overload protection
Enclosure : ABS with Glass enclosure, heavily braced
Attachment : Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille : Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection : CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16″) and 9.0 mm (0.36″)
Environmental : IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
Dimensions : 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland nut
359 mm (14.2 in) including bracket extending
Colors : Available in gray (similar to Pantone 420C)
and black (-BK)
Net Weight : 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight : 14.1 kg (31.0 lb)
Included Accessories : U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.