Subwoofer JBL ASB6125

Features :
2 x 2265H-1 15″ Differential Drive® dual voice coil dual gap, neodymium magnet transducers
1600 watts continuous pink noise, 6400 watts peak power handling capacity
Parallel/Discrete switchable input mode
Large vent area for high output with low distortion
For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

Specifications :
Frequency Range
(-10 dB) : 32 Hz – 1 kHz
Frequency Response
(ą 3 dB) : 38 Hz – 1 kHz
Transducer Power Rating : 1600 W (6400 W peak), 2 hrs
Input Modes : Drivers Parallel / Drivers Discrete
Long-Term System Power Rating : 1350 W (5400 W peak), 100 hrs.
Maximum SPL (1m) : 35 Hz – 400 Hz: 132 dB-SPL
cont avg (138 dB peak)
System Sensitivity : 35 Hz – 400 Hz: 100 dB-SPL,
1W (2.0V) @ 1m
Nominal Impedance : 4 ohms in parallel-drive mode
2 x 8 ohms in discrete-drive mode
Low Frequency Driver : 2 x 2265H-1, 380 mm (15 in) dia.,
75 mm (3 in) Dual Coil Dual
Gap neodymium Differential Drive® drivers
Enclosure : Rectangular cabinet, 16 mm (5/8 in)
exterior grade 11-ply birch plywood
Suspension Attachment : 16 points (4 top, 4 bottom, 4 each side),
M10 threaded hardware
Finish : Black DuraFlex” finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel,
with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) : 965 x 419 x 597 mm
(38.0 x 16.5 x 23.5 in)
Net Weight : 36.7 kg (81.0 lb)
Optional Accessories : M10 x 35 mm forged shoulder
eyebolts with washers

Strona Producenta:
http://www.jblpro.com
Dokumentacja Techniczna:
dokumentacja techniczna