The DM-RMC-SCALER-S provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® Fiber receiver, video scaler, and control interface, providing a single HDMI® output along with Ethernet, USB HID, RS-232, and IR control ports. Built-in scaling enables the connected display to handle virtually any video signal. Its compact, low-profile design allows the DM-RMC-SCALER-S to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single multimode fiber strand.
DigitalMedia 8G™ Fiber
As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM®) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility.
DigitalMedia 8G is the latest generation of DM, providing a true one-wire transport for moving high-definition video, audio, and Ethernet over fiber optic cable without any compression or repeaters. Engineered for ultra high-bandwidth and ultimate scalability, DM 8G handles uncompressed video beyond high-definition with support for HDCP, Deep Color, and 3D. Audio capabilities include simultaneous stereo and multichannel surround sound signals, with support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over one strand of multimode fiber, supporting distances up to 1000 feet (300 m) using CresFiber® 8G Fiber Optic Cable.
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-SCALER-S, supporting HD 1080p60 video and WUXGA computer signals with HDCP, Deep Color, 3D, and multi-channel HD lossless audio — all through a single connection. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable. In addition, there are RS-232, IR, and Ethernet control ports provided for controlling the display device and interfacing with other equipment.
A single fiber strand connects the DM-RMC-SCALER-S to a DM switcher or transmitter, transporting video, audio, control, and networking signals all through one simple SC type optical connection. Multiple DM-RMC-SCALER-Ss may be installed to handle each display in a multiroom distribution system, all fed from a central DM-MD series switcher. Or, a single DM-RMC-SCALER-S can be fed straight from a DM 8G Fiber transmitter, affording a simple solution for extending a computer or AV signal to a single display.
Through a distributed scaler approach, DigitalMedia delivers an incredibly flexible and user-friendly solution for routing multiple disparate sources to many different display devices. By placing an independent high-performance scaler at every display device, DM ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the home. It also allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater’s full HD 1080p 3D image with smaller, lesser displays in the kitchen, bathroom, and bedrooms.
The DM-RMC-SCALER-S accepts any video source from standard NTSC 480i to HD 1080p60 w/Deep Color, as well as computer sources from VGA to UXGA/WUXGA, and scales them perfectly to match the native resolution of your video display. A range of common output resolutions are supported to work with virtually any popular flat-panel display, projector, or computer monitor. Intelligent frame rate conversion enables support for 24p and PAL format sources, and 3D to 2D conversion allows 3D content to be fed simultaneously to separate 3D and 2D displays. Setup and use of the scaler is simplified through fully automatic operation utilizing the display’s EDID.
A pair of DM-RMC-SCALER-Ss can also be used to facilitate a dual-projector 3D setup, steering just the left eye portion of a 3D signal to one projector, and the right eye portion to the other. This is done using the scaler’s 3D to 2D conversion mode, enabling 3D capability with scaling.
Video Wall Processing
The DM-RMC-SCALER-S has another trick up its sleeve, providing zoom capability on its output to display just a portion of the source image. Using this feature, multiple units may be combined to configure a high-definition video wall composed of up to 16 individual displays. Configurations of 2×2, 3×2, 3×3, 4×3, or 4×4 are supported, and all that is required is a separate DM-RMC-SCALER-S for each display, and a DM switcher with sufficient DM 8G Fiber outputs.
Along with high-definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-SCALER-S includes a 10/100 Ethernet port, providing a convenient LAN connection for a local network device.
The DM-RMC-SCALER-S functions as a keyboard/mouse extender, allowing a USB HID-compliant keyboard and/or mouse to be connected at the display location and used to control a computer or other component located at the central equipment rack or some other location.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. The DM-RMC-SCALER-S includes built-in RS-232, IR, and Ethernet control ports to allow programmable control of the display device connected to it. But, it can also provide an alternative to such conventional control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-RMC-SCALER-S provides a gateway for controlling the display device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR probes.
Its low-profile design makes the DM-RMC-SCALER-S perfect for installation behind a flat panel display or above a ceiling mounted projector. It mounts to a standard 2-gang US, UK, or European electrical box using the mounting bracket provided, affording for a clean installation that protrudes less than 1-1/2 inches (37 mm) from the mounting surface.
Connections are positioned on the top and bottom of the unit. The design of the mounting bracket allows wires up to 0.23 inches (6 mm) in diameter to extend from the electrical box behind as needed. An array of indicators is provided on the front panel for easy setup and troubleshooting.