JBL VP7210/95DP

Features :
Compact Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable or installed use.
Optimized for both portable/rental or permanent-venue use.
1750 watts peak output power, 875 watts continuous.
10-inch Differential Drive® low-frequency driver for extended lowfrequency output.
Robust powder-coated die cast aluminum handles, designed for strength and comfort.

Specifications :
Frequency Response : 80 Hz 20 kHz
( ą 3 dB)
Frequency Range : 50 Hz 20 kHz
(-10 dB)
Coverage Pattern : 90° x 50°
rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Maximum Peak Output : 132 dB SPL 1m
Transducer Section :
Low Frequency Section : JBL 2261FF, 254 mm (10 in) dia., 76 mm (3 in) Dual Coil neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance : 2 x 2 ohms
High Frequency : JBL2452H-SL, 100 mm (4 in) titanium damped diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance : 8 ohms
System :
DP2 Internal Amplification Output (at nominal load) : 1750 Watts Peak,
875 Watts Continuous
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) : 750LF/125HF Watts
DPC-2 Output Section : LF: Dual Bridged Technology”, Class D HF: Bridged Class D
Audio Input connector : XLR with loop-through
User Controls : 80 Hz Subwoofer High Pass Filter. Enable/Disable 0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing : DSP Based, resident in Input Module
System Management : DSP based limiters for mechanical and thermal protection
AC Power Operating Range : 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage : 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector : Neutrik PowerCon (NAC 3MPA)
AC Loop-thru : Neutrik PowerCon (NAC 3MPB)
AC Current Requirement : 6A per system at 120V, 3A per system at 240V
Enclosure :
Box Construction : 5/8in multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex” finish.
Suspension System : 10 M10 Fittings
Grille : 14 Gauge Black powder-coated perforated steel with foam backing
Dimensions (H x W x D) : 521 x 293 x 303 mm
20.5 x 11.5 x 11.9 in
Net Weight : 18.4 kg (40.5 lbs)

Strona Producenta:
http://www.jblpro.com
Dokumentacja Techniczna:
dokumentacja techniczna