JBL VP7212/95DPC

Features :
Compact Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable or installed use
Optimized for both portable/rental or permanent-venue use
1750 watts peak output power, 875 watts continuous
12-inch Differential Drive® low frequency driver for extended low frequency output
Robust powder-coated die cast aluminum handles, designed for strength and comfort
Integrated 35 mm stand mount

Specifications :
Frequency Range : 55 Hz – 20 kHz50
Frequency Response : 65 Hz – 18 kHz80
Coverage Pattern : 90°x 50°
Directivity Factor (Q) : 12.6
Directivity Index (DI) : 11 dB
Maximum Peak Output1 : 134 dB SPL 1m
Transducer Section :
Low Frequency Section : JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil Neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance : 2 x 2 ohms
High Frequency : JBL 2452H-SL, 100 mm (4 in) titanium damped diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance : 8 ohms
System :
DPC1 Internal Amplification Output (at nominal load) : 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped pink noise into rated load impedance) : 750LF/125HF Watts
DP1 Output Section : LF: Dual Bridged Technology”, Class D
HF: Bridged Class D
Audio Input connector : XLR with loop-through
User Controls : 80 Hz Subwoofer High Pass Filter. Enable/Disable 0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing : DSP based, resident in Input Module
System Management : DSP based limiters for mechanical and thermal protection
AC Power Operating Range : 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage : 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector : Neutrik PowerCon
AC Loop-thru : Neutrik PowerCon
AC Current Requirement : 6A per system at 120V, 3A per system at 240V
Enclosure :
Box Construction : 5/8in multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex” finish.
Suspension System : 13 M10 Fittings, 35 mm pole mount socket
Grille : 14 Gauge Black powder-coated perforated steel with foam backing
Dimensions (H x W x D) : 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight : 21.3 kg (47 lb)

Strona Producenta:
http://www.jblpro.com
Dokumentacja Techniczna:
dokumentacja techniczna