Features :
High power 200 mm (8 in) dual-coil CMCD” Cone Midrange Compression Driver provides high sensitivity and high continuous SPL capability along with low distortion, extended bandwidth and improved phase coherence.
Large format neodymium HF driver provides clear, intelligible high frequency projection.
Large PT” Progressive Transition” waveguides provide excellent 60° x 40° pattern control, low distortion at high SPL levels and smooth frequency response.
Rotatable waveguides allow either horizontal or vertical cabinet orientation.
Sophisticated, steep-slope passive crossover network with bi-amp/passive switchable crossover modes.
Sophisticated, steep-slope passive mid high crossover network with switchable tri-amp/bi-amp crossover modes.
Specifications :
Frequency Range : 200 Hz to 18 kHz
(-10 dB)
Frequency Response : 240 Hz to 16 kHz
( ą 3 dB)
Coverage Pattern : 60°x 40°
Directivity Factor (Q) : 22.4
Directivity Index (DI) : 13.5 dB
Crossover Modes : Bi-amp / Passive switchable
Passive Crossover : 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 100 hrs
Long-Term System Power Rating (IEC) : Passive Mode: 300 W (1200 W peak), 100 hrs
Maximum SPL : Bi-amp mode: MF: 135 dB SPL cont avg (141 dB peak) HF: 135 dB SPL cont avg (141 dB peak) Passive mode: 135 dB SPL cont avg (141 dB peak)
System Sensitivity6 (1W @ 1m) : Passive Mode: 110 dB-SPL
Mid Frequency Driver : CMCD82H cone mid-range compression driver with integral 200 mm (8 in) diameter Neodymium Differential Drive NDD” dual voicecoil driver
Nominal Impedance : 8 ohms
Sensitivity6 (1W, 1m) : 110 dB-SPL
Waveguides : PT-N64MF 600 x 600 mm (24 x 24 in) HF: PT-H64HF 300 x 300 mm (12 x 12 in)
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories)
Finish : Black DuraFlex” finish. White (-WH) available upon request.
Optional Weather Resistant Versions : WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature
Grille : Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
Input Connectors : Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX
Dimensions (H x W x D in vertical orientation) : 991 x 673 x 706 mm (39.0 x 26.5 x 27.8 in)
Net Weight : 58.8 kg (130 lb)
Optional Accessories : 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts
